Send SMS
Contact Us

Flow meters

Flow Meter VS Series

We offer highly specialized Flow meter VS series having the following features:

Flow Range I/min - 0.002-525

Flow Range GPM - 0.0005-138.00

K-Factor I/min - 50000-300

Accuracy ± 0.3 % of measured value at viscosity > 20 cSt (< 20 cSt reduced accuracy)

Repeatability ± 0.05 % under same operating conditions


Max. Operating Pressures Cast Iron 315 bar/4568 psi, Stainless Steel 450 bar / 6526 psi

Medium Temperature Standard –30 ≤ ... 120° C, Ex-design –20 ≤ ... 100° C, High temperature –40 ≤ ... 210° C

Viscosity Ranges 1...100 000 cSt

Mounting Positions unrestricted, on subplate with side or bottom connections

Noise Level max. 72 dB(A)


Additional Information:

Flow Meter VTR Series

Flow Meter VTR Series

Approx. Rs 55,000 / Piece

We offer the highly accurate, reliable & durable Flow meter VTR series


Additional Information:

Flow Meter EF Series

Approx. Rs 95,000 / Piece

We offer specialised Flow meter EF series having following features:

Flow range I/m - 0.05 -150

Tooth-volume cm3/pulse - 0.04 - 4.0

Frequency (Hz) - 4.2 - 1666.7

K-Factor (pulse/l) - app 250 - app 25000

Accuracy at 21 mm2/s - 2%

Viscosity range mm2/s - 2 - 10000

Max. operating pressure 200 bar (2,900 psi)

Medium temperature 0° C ... 80° C (32° F ... 176° F)


Mounting positions unrestricted


Filtering - 20 μm - 100 μm

Side pipe connection - G 1/4” - G 1”


Weight 0.62 kg - 5.24 kg




Additional Information:

Dosing Pump

Dosing Pump

Approx. Rs 50,000 / Piece

We offer highly durable & reliable dosing pumps which are designed for applications that depend on the highest level of precision.

 


Additional Information:

Delivery Pump

Delivery Pump

Approx. Rs 55,000 / Piece

We offer the Beinlich delivery pumps which are nearly wear-free due to the use of high-performance materials like nitrided steel or spheroidal cast iron.

· Thus, the pumps not only have minimal maintenance requirements, but also a long service life.

· Additionally, a high volumetric efficiency partially allows an energy saving of over 30% which also offers cost saving potentials to the customer.

Additional Information:

External Gear Pump Dartec

External Gear Pump Dartec

Approx. Rs 5 Lakh / Piece(s)

We offer the Small, lightweight, compact, efficient – this describes the new pump series from Beinlich Pumpen GmbH. DARTec® (dispense-automation-robot-technology) was designed for applications that depend on the highest level of repetition and dispensing precision.

FEATURES:

· With its 700 gram lightweight construction, DARTec® is optimal for use on handling equipment and robots. Small masses to be moved make a high level of dynamics in the process possible.

 

· The permanently lubricated bearings that do not come into contact with the fluid lead to optimised overall efficiency.

 

· Loss of friction in the slide bearings, heating up of the fluid and problems with a chemical reaction of the fluid are no longer relevant – especially not with fluids, like methacrylate for example, that experience a temperature increase through friction and tend towards polymerisation.

Diverse materials for media contact parts like gears, centre plates and stop disks are available for delivery.

 

· An optimum customised design is thus available for the application at hand. If needed, models with motors are available as complete solutions according to customer specifications.

 

 


Additional Information:

External Gear Pump ZPDA

External Gear Pump ZPDA

Approx. Rs 50,000 / Piece

We offer the high-precision ZPDA dosing pumps which are specifically developed for applications with the highest requirements on accuracy and meet the highest technical standards in pump design. In order to achieve this high precision and optimum efficiency, the internal sealing of the pressure chambers is adjusted by means of clearances appropriate to the circumference and height of the gears depending on the medium to be transferred, the pressure, and the viscosity.

Depending on the requirement, the special hard coatings on the parts permit a wide range of unconventional applications and ensure a long service life. Additionally, flow meters, connection blocks and pressure sensors can be mounted directly on the pump.

Performance data

§ Displacements 0.1 to 26.0 cc/rev

§ Speed range 10 to 200 rpm

§ Viscosity range 1 to 1,000,000 mPas

§ Ambient temperature range -30 to 60°C

§ Fluid temperature range / operating temperature range -20 to 150°C

§ Pressure range up to 200 bar

 

Areas of application

§ Dosing technology

§ Process engineering and technology

§ Automotive industry

§ Mechanical engineering and plant construction

§ Electronics industry

§ Aircraft industry

§ Glass industry

§ Plastics and wood processing

 


Additional Information:

Flow Meter RS Type

Flow Meter RS Type

Approx. Rs 75,000 / Piece

We offer highly specialised Flow meters RS Type

Additional Information:

Flow Measuring Equipment

Flow Measuring Equipment

Approx. Rs 55,000 / Piece

We represent VSE flow measurement equipment which is installed worldwide in technical process plant in the plastics, chemical, pharmaceutical, paints and inks, hydraulic and automotive industries as well as for 2K technology.

The VSE flow meters deliver highly precise flow measurement results for virtually all pumpable media. Applications include flow measurement, hydraulic systems, precision dosing, system monitoring and the open loop controls of mixing ratios.


Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Flow meters ?

    country-ico

    We will contact you soon !

    Aakash Kumar

    (Business Development Manager)

    Control Electric Company Private Limited

    Sector 80, Noida, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us